“tonality characteristics” and “soundstage” are subjective words that have no concrete definition. Other similar words are “grain”, “speed”, “separation”, “resolution”. They can’t be objectively measured, and are most likely just another function of frequency response.
The differences between headphones are most likely your ear having a different shape from the reference ear used to make the eq targets, leading to a different final perceived frequency response. (or limitations in the accuracy of the measurements, most targets I believe are “smoothed”)
I’m going to trust the (claimed, who knows, maybe oratory1990 is a liar) consensus of audio engineers over your anecdotes. As I said there are plenty of audiophiles whose “lived experience” is that $2000 golden cables are necessary and that they can tell the difference between any $200 and $1000 DAC (even though a decent DAC in that price range already has a dynamic range and signal-to-noise ratio of 100-120dB which should be totally indistinguishable from perfectly clear audio for all humans
personally the only decent-ish headphones I have are DT 880 600 ohm and a JBL 760NC. The latter kind of fills all the boxes of being a wireless headphone and has poor reviews and a poor default sound profile. But after EQing both, I can’t really notice any difference except when very carefully doing side-to-side comparisons (besides the much better comfort of around-ears vs over-ear).
In contrast I believe I can tell, with some songs, the difference between 320kbps mp3 and flac (just 44.1khz), but even there I’m not sure it’s not just placebo
Usability is kind of secondary, android should have jamesDSP and the venn diagram of people that know the best headphones to buy (instead of beats by dre) and who can setup an EQ (install an app and follow written instructions) should have a lot of overlap
I will say though that more expensive headphones are probably going to last longer and are probably much more comfortable
No my dude, tonality characteristics are about how each driver responds to each frequency signal. There’s tons of research that goes into the materials and construction of headphone drivers, they’re not all the same. Soundstage is also not subjective. Although I do not know how you can measure it, I’ve played audio through my open headphones to people and they genuinely cannot tell if the sound of an opening door for example is coming from the headphones or if it’s real. That’s the type of efect soundstage gives you.
So you’ve only tried a very siblant headphone (dt880) which isn’t necessarily bad and a JBL wireless headset? Instead of reading so many forum posts, go to an audio shop and try the actual headphones before trying to lecture other people in things you have never experienced yourself. I’m sorry if it sounds harsh but you’re trying to give advice on something you’ve never tried and have only read random forum posts about.
As I said there are plenty of audiophiles whose “lived experience” is that $2000 golden cables are necessary and that they can tell the difference between any $200 and $1000 DAC (even though a decent DAC in that price range already has a dynamic range and signal-to-noise ratio of 100-120dB which should be totally indistinguishable from perfectly clear audio for all humans
I am not one of those people. Even though there is snake oil in the industry, that does not mean that everything is snake oil. If a cable passes the continuity test then that’s good enough. And regarding dacs, a lot of the advice I’ve read also says that going beyond $100 you won’t find a big difference in sound.
Usability is kind of secondary
Usability, my friend, is king. When you get older and have to do tons of stuff, adding more things to the list ends up getting very annoying. Not just that, if you were to migrate to iOS for whatever reason, you’d lose the ability to eq your headphones. So an app existing and being maintained today and for 1 mobile os does not guarantee that the problem has been solved forever. You’re depending on a random third party.
“tonality characteristics” and “soundstage” are subjective words that have no concrete definition. Other similar words are “grain”, “speed”, “separation”, “resolution”. They can’t be objectively measured, and are most likely just another function of frequency response.
The differences between headphones are most likely your ear having a different shape from the reference ear used to make the eq targets, leading to a different final perceived frequency response. (or limitations in the accuracy of the measurements, most targets I believe are “smoothed”)
I’m going to trust the (claimed, who knows, maybe oratory1990 is a liar) consensus of audio engineers over your anecdotes. As I said there are plenty of audiophiles whose “lived experience” is that $2000 golden cables are necessary and that they can tell the difference between any $200 and $1000 DAC (even though a decent DAC in that price range already has a dynamic range and signal-to-noise ratio of 100-120dB which should be totally indistinguishable from perfectly clear audio for all humans
personally the only decent-ish headphones I have are DT 880 600 ohm and a JBL 760NC. The latter kind of fills all the boxes of being a wireless headphone and has poor reviews and a poor default sound profile. But after EQing both, I can’t really notice any difference except when very carefully doing side-to-side comparisons (besides the much better comfort of around-ears vs over-ear).
In contrast I believe I can tell, with some songs, the difference between 320kbps mp3 and flac (just 44.1khz), but even there I’m not sure it’s not just placebo
Usability is kind of secondary, android should have jamesDSP and the venn diagram of people that know the best headphones to buy (instead of beats by dre) and who can setup an EQ (install an app and follow written instructions) should have a lot of overlap
I will say though that more expensive headphones are probably going to last longer and are probably much more comfortable
No my dude, tonality characteristics are about how each driver responds to each frequency signal. There’s tons of research that goes into the materials and construction of headphone drivers, they’re not all the same. Soundstage is also not subjective. Although I do not know how you can measure it, I’ve played audio through my open headphones to people and they genuinely cannot tell if the sound of an opening door for example is coming from the headphones or if it’s real. That’s the type of efect soundstage gives you.
So you’ve only tried a very siblant headphone (dt880) which isn’t necessarily bad and a JBL wireless headset? Instead of reading so many forum posts, go to an audio shop and try the actual headphones before trying to lecture other people in things you have never experienced yourself. I’m sorry if it sounds harsh but you’re trying to give advice on something you’ve never tried and have only read random forum posts about.
I am not one of those people. Even though there is snake oil in the industry, that does not mean that everything is snake oil. If a cable passes the continuity test then that’s good enough. And regarding dacs, a lot of the advice I’ve read also says that going beyond $100 you won’t find a big difference in sound.
Usability, my friend, is king. When you get older and have to do tons of stuff, adding more things to the list ends up getting very annoying. Not just that, if you were to migrate to iOS for whatever reason, you’d lose the ability to eq your headphones. So an app existing and being maintained today and for 1 mobile os does not guarantee that the problem has been solved forever. You’re depending on a random third party.