It is. I don’t know if it’s a Prusa MINI issue or a general one, but after changing the filament the pressure in the nozzle isn’t enough to get a good print.
It lookes like that print just has one filliment switch? If that is the case, my query was why there was a hole where the eye is - should the white layer under it not just be flat?
You may want to look at what the slicer is doing there and maybe change the infill settings.
It looks like there is a holr there though? Is this not just a single filament switch at a certain layer height?
It is. I don’t know if it’s a Prusa MINI issue or a general one, but after changing the filament the pressure in the nozzle isn’t enough to get a good print.
Check in the slicer to see what it’s doing there, looks strange
I probably misunderstood what you’re talking about?
It lookes like that print just has one filliment switch? If that is the case, my query was why there was a hole where the eye is - should the white layer under it not just be flat?
You may want to look at what the slicer is doing there and maybe change the infill settings.
Ah, now I understand. There’s not a 100% infill, that’s why it’s not solid.