Hello fellow withprinters. Whats happening here? Stringing is not the problem, if i print string tests, they are good. Its only in holes, the walls wont stick. Any suggestions for a fix?
Edit: Found the problem. The temperature sensor was faulty. Changed it and now everything is fine.
In your second picture is your print upside down/bottom layer facing up? If yes, that’s “normal” slicer behavior for round things that end. You can trick your slicer into making those bridges by adding a 0.2mm high bridge - just make sure that it doesn’t touch the two walls and your slicer will generally not print floating perimeters. You can test this theory by looking at the sliced preview in your slicer.
I think ot looks ok. Font know how to add bridges in the slicer. Its not my design so i only have the .stls