Hi all

A higher nozzle diameter has the benefit of being able to print faster due to to bigger layer width. There is a tradeoff, you’ll have to lower print speed and/or raise temperature to maintain proper layer adhesion. That means that there is an optimal nozzle size for a given print speed/temperature combination. You also don’t want temperature too high because it will burn/degrade your filament.

In my experience layer adhesion is quite poor with a nozzle of 0.8mm and it also prevents you from printing finer details (gear teeth for example). The tradeoff versus a 0.4mm nozzle doesn’t seem worth it especially if you print overnight.

What are your experiences?

  • equidamoid@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Almost always 0.4 (sometimes 0.4 stainless). It is the biggest one that still gives me acceptable tolerances, and printing time is easier to deal with than imprecise parts.

    Changing the nozzle and recalibrating feels like too much of a hassle for me, so I didn’t experiment much though.

    • Voyajer@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      What is your use case for stainless nozzles? For abrasives I use Hardened steel nozzles just to not lose even more thermal conductivity.

      • equidamoid@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Food grade stuff. Cookie cutters, spares for cat drinking fountain. I guess hardened could’ve worked too. Printed with ColorFabb HT, so it can just go to dishwasher.