You might be able to get marginal improvement for overhangs by adjusting support z contact distance, if I’m understanding your problem correctly. I’m usually fiddling a bit with mine, too close and supports are hard to remove. Too far and mine looks close to this.
I’ve been happy with the tp link TV-IP324PI, it’s a Poe bullet cam with a simple web interface (I don’t think it requires JS, but at any rate you just need to log in once to set a password, make sure upnp is off, and adjust camera/encoding/fps/text overlay settings to your liking). There’s also the amcrest IP5M-B1186EW-28MM, another similar Poe bullet cam with night vision that works local only. I’ve used both for several years and I think they support onvif but I had no issues using the rtmp url with zoneminder
That’s just how Place has always ended, with an automatic random white tile placement that slowly erases everything.
Does that include free games like trackmania? I literally only used my Ubisoft account for that but I never purchased it since it was free
It’s hit or miss but in my experience as long as you can find one with the same release group as the video file you have it should sync up
You can even use stories in signal, though I turned it off in settings and have forgotten since launch that it exists until this post reminded me.
Nice tip, though don’t forget to share some trackers too, I’ve been stuck at 0% on a torrent someone shared as only the infohash. I’m guessing their DHT isn’t working, and despite adding trackers, without knowing what trackers any of the other seeds are using it’s just a guessing game adding open trackers blindly, or a waiting game hoping I can find peers using DHT.
I would recommend getting a separate client radio device for several reasons:
Personally I would get a nanostation loco 5ac (non-loco is bigger and probably isnt needed) and flash openwrt on it (that will free any airmax radio from the proprietary airmax limitation), configure the 5GHz radio to client mode with the apartment wifi details, and put in the desired mac into the mac field if you need a specific mac besides the device default. Make sure the radio is set to wan zone so that forwarding works and plug the lan cable from the radio to the WAN of whatever nice router you have.
I used to carry around a nanostation with this config set to xfinity access points with a small script that would pick a random MAC from a list I gathered from wardriving client MACs that I saw authenticated with xfinity hotspots. That way if I ever needed an ethernet connection for a non-wifi device I could just power up the radio and run the script to pick a new mac until I got one that was “remembered” in someone’s xfinity account.
Edit: to clarify, I think the way I set it up was to run dhcp client on the radio’s uplink and then hand out IPs via dhcp server on the lan port, so I think you’d be triple natted, but since you would need to double nat anyway to get around the MAC authorization it probably isn’t hurting speeds any more than it already would be.
Same issue is why mastodon needs your origin server to be online to migrate to a new server. In both cases, federating a public key for the server or accounts would allow either to pop up at a new domain and prove it has the authority to migrate links to the new location.
With activitypub all involved servers also replicate the content so I’m not sure what distinction you’re trying to make. That’s why we can still see all the communities, posts, and comments on the servers that are still online.
This container is great, I use it for my arrstack. If the VPN connection goes down, the container infinitely restarts until it can get a connection again.
I’m miffed that mullvad did away with recurring subscriptions, so you have to remember to refill the account if you have stuff relying on it.
Lately I’m the second one every day of the week
I just installed the Youtube-shorts block extension which is available for both chrome & firefox. Between that and still using a revanced patched youtube apk hopefully I never have to see shorts again.
I think this answer is the most accurate. People get too hung up same names on different servers. There will always be multiple versions of a community whether they have the same name on different servers or whether one of them snagged the og name and others prefixed with Real_x / True_x. Imo I like it this way better because there’s less favoritism to the one that comes first / people can’t universally squat on a community name
This is the solution. I reverse proxy from a digitalocean droplet running haproxy which sends traffic via send-proxy-v2, then I set the tunnel subnet as a trusted proxy ip range on traefik which is what haproxy hits through the tunnel, which causes traefik to substitute in the reverse proxied original ip so all my apps behind traefik see the correct public IP (very important for things like nextcloud brute force protection to work)
Hetzners risk averseness is so annoying. I tried to sign up and rent a dedi to replace my rack mount nas. Considering electric costs I was happy to pay a few hundred a month for substantial storage. Didn’t realize they didn’t accept privacy.com cards (I don’t even use them to cancel, it’s just so I can change banks and switch 1 billing link instead of 100). Account rejected and deleted and no response from support.
I also believe in free housing and transit access as a right.
I would argue that Mastodon and friends are a “good, healthy, worthwhile place to hang out”, at least it really feels that way to me. It seems to have attracted a really wholesome crowd that really delights me considering I’m used to it being less of a crowd but just a handful of techie people hanging out in an obscure clubhouse. All the same people I have followed there are still there yet I now have a buffet of variety to chat with.
The screenshots in some of those tickets look so good :D